Characteristics

• Durable for everyday, everywhere use by everyone.
• Extremely portable.
• Quiet to medium volume.
• Light to medium backpressure.
• Curved wind way reduces moisture buildup.
• All polymer construction eliminates corrosion.
• The tuning slide requires no lubrication.
• Tone ring allows moving the whistle's sweet spot between octaves.
• Quiet practice mode.
• Weight 1.3 oz (for the ultralight backpackers)

Why CPVC?

In short, because a CPVC whistle can take abuse and still be a fine whistle.

Some whistlers turn up their nose at the mention of a whistle made from PVC water pipe. This is understandable since it is an inexpensive material, easily found nearly everywhere you go and has absolutely no snob appeal. Being a whistle snob is not a bad thing. There are many dimensions to the simple pennywhistle, and many ways to enjoy them. Since they are relatively inexpensive as musical instruments go, you will no doubt have a collection. (Bet you can't own just one!) So why not have some that you enjoy displaying and handling? Fine woods have attracted the eye and hand for centuries.

Ok, back to the PVC. I started making whistles because I was camping in Florida and wanted to have one I could take with me and not be concerned about how it was handled. Not only was I camping, I was camping via kayak, on beaches in the Everglades.

You probably have spent a day at the beach sometime during your life. (If you have not, get to it - you are missing something.) Remember how it was impossible for you to keep the sand out of anything? You food, your hair, any crack or crevice caught some sand. OK, now stick around after the sun goes down. In sub-tropical Florida that means you are now living at the dew point, the sand and water is salty and attracts water. Everything is damp, and sand is everywhere. Repeat for several days. You get the idea.

What kind of whistle could thrive in that environment? One that was virtually indestructible. It didn't take long for me to decide on PVC pipe as the starting point. It is already the correct dimension for some keys, and is easily worked. Both of these attributes allow me to offer them at a reasonable price.

As materials go PVC is the modern version of tin. It is inexpensive, easily worked, and widely available. Whistles should be made from PVC today. Not exclusively but they should be available. They should be everywhere. I'm proud to say I make PVC whistles.

The magic of the pennywhistle is not so much in the material, but in where the material is and is not. In other words, the magic is in the holes. Thanks to Glenn Schultz for proving it with his Water Weasels. They play wonderfully. Need proof? Just try and pry one of Glen's Water Weasel's from a whistler.

Now I am not comparing these whistles to Glenn's. Mac Hoover once told me to just make whistles that please yourself, and don't worry what others want. You won't be able to please everyone, he said. So that is what I did. I made whistles, and I made more whistles. And I played them. And I made some more. I hope you like the result.

Complex machining adds to the cost so I have tried to keep these whistles simple to make.

There are no metal parts, not even pins to hold the fipple. You can put the whistle straight into the dishwasher to clean it, should it need cleaning. In fact that is the last step before I ship your whistle to you. I separate the parts and put them upright on one of the posts. Make sure you turn off the heat dry cycle, after all the whistle is plastic.

The tuning slide is quite stiff by design. I hate a whistle that changes key while I'm playing because the slide moved during a rousing reel. If you prefer a lighter touch when tuning you whistle, just take some fine sandpaper or steel wool and rub on the bit that goes inside the other until it is as you like it.

The Tone Ring

Whistle voicing and tuning is a compromise. The physics make it so. It is possible to design the whistle so it is at it's best at a certain frequency, and all others are slightly less perfect. Some tunes spend a lot of time in a small range of notes. This is one reason why some players will change whistles based on the tune.

What if there was some device on the whistle that would let the player move the location of this sweet spot? The tone ring on the "Every" line of whistles allows you to strengthen the notes in the lower octave by placing it such that it forms sides on the sound window. To favor the upper register more, push the ring down away from the mouthpiece.

Another thing the tone ring allows you to do is muffle the whistle. On the web I have seen lots of threads asking "How can I quiet my whistle so I can practice without disturbing others." My favorite approach had been the blow across the top method. The downside is this only gives you the lower octave notes. When the tune goes into the high octave you have to think it higher. Also, the breath requirements were not like playing the whistle properly.

By turning the tone ring to either side and just leaving a quarter or less of the window exposed you can play both octaves and not raise a ruckus. This also helps preserve your hearing. It won't teach you how to blow the notes into tune, but it is very close to proper playing. You can practice breathing and supporting the high notes this way too. But, changing the window, alters the tuning and you will have to sharpen the whistle as you close the tone ring to stay in tune with your mates.

This works so well I practice at night in a hotel room while I am traveling.

Here are two versions of the B part of Connachtman's Rambles, one with the tone ring in un-muted position and one in the muted position:

Connachtmans B part un muted (click to play)

If you wish to really fine tune (pun intended) your whistle, you can do so with a small sharp knife or a bit of rolled up sandpaper. First, with a reliable tuning device find the sharpest hole on the whistle.(Some people's ears are reliable, but not mine - I need some technology and use an audio tuner on my PC.) Then very carefully, remove material from the other holes until the note that comes out when you lift your finger is exactly where you want it. Start with the holes at the bottom of the whistle, and check the effect on notes two or three holes up as you go. Remember how all those holes work together to give you a C sharp and C natural?

I advise against messing with the mouthpiece or tone window unless you really know what you are doing. However, if you want to experiment, feel free. You can always replace the mouthpiece for not much money.